DIY Leather Barebow Archery Finger Tab with 3D Printed Scale

I designed and made custom three-finger finger tabs for barebow archery. I needed finger tabs in three sizes – for myself, my 14 years old son, and my 11 years old daughter. For the insert with the scale, I’m using a 3D printed plate, which also serves as a stitching template.

FacebooktwitterredditpinterestlinkedinmailFacebooktwitterredditpinterestlinkedinmail

Weighted Universal Thread Stand for Cones and Cross Wound Spools

Universal Thread Stand for Cones and Spools

I designed a thread stand to be used with thread cones and cross-wound thread spools (for sewing machines that don’t have horizontal spool pins). To make the stand a bit more substantial, the base can be filled with something heavy, like sand, lead shot, or bearing balls. The conical spool cap has two diameters: wider for bigger spools, and narrower for smaller ones. To make it you need a 3D printer, some glue, and 12-gauge steel wire for the center pin and the arm.

FacebooktwitterredditpinterestlinkedinmailFacebooktwitterredditpinterestlinkedinmail

Scrub cap/surgical cap easy pattern

I have been making scrub caps for hospital nurses and doctors, and thought that I’d share my pattern. I’ve refined this pattern from these two Youtube videos: DIY Scrub Cap by Lea Goes Green and Scrub Cap by Larissa Fontenot. I have improved on the two above patterns, to:

  • adjust the sizing
  • add a little more bulk in the rear to tuck away long hair
  • get rid of the tricky to sew area in the back of the cap side
  • add two buttons for hooking face mask elastic ear loops
  • improve fabric cutting efficiency (by having the tie straps separate from the sides
  • allow for optional french seam for a more finished, professional look

This is a quick design that requires no ribbons and consists of only three details. I prefer this single-layer design to double-layer reversible ones because it is lighter, more breathable, and quicker to make. Finally, the design features two buttons on either side to attach the elastics from a face mask.

I have delivered 20 caps to one of the hospitals, and the feedback I got was very positive. The size fits everyone and the button placement was described as just right. The nurses preferred lighter-weight to medium-weight cotton fabric.

FacebooktwitterredditpinterestlinkedinmailFacebooktwitterredditpinterestlinkedinmail